Instructions;
-Warnings and Firearm Safety:
REMINDER OF BASIC FIREARM SAFETY
1.) Treat all firearms as if they were loaded.
2.) Keep your finger off the trigger until you are on-target and ready to shoot.
3.) Never point the firearm at anything you are not willing to destroy.
4.) Be aware of your target and what is beyond it.
- Installation Always confirm the firearm is unloaded before installing or removing any suppressor or muzzle device. Ensure the firearm's bore is unobstructed by observing from the breech end. Be sure your suppressor or muzzle device's threads match the firearm's threads. Inspect the threads of both the muzzle and suppressor, be sure they are clean and free of debris.
-Standard Direct Thread Suppressors:
For Direct-Thread Suppressors (HC55, HC57, HC97R...) With the muzzle pointed in a safe direction, carefully screw the suppressor clockwise until the threads catch. The suppressor should smoothly thread on, take care not to cross thread when starting threads. Never force threads. If you require more than light finger pressure while threading on your suppressor, or begin to feel resistance, stop immediately and give us a call! *Note: The Baba Yaga 2 is a left hand thread suppressor Continue threading the suppressor on until it bottoms out snugly and hand tight on the shoulder behind the muzzle threads.
*Note: The Baba Yaga 2 indexes off the muzzle. Be sure the Muzzle and threads are clean and free of debris prior to installation.
-HC67 & HC65 HUB Suppressors: For HUB Mounted Suppressors (HC67...) Select a HUB compatible adaptor externally threaded for the industry standard 1.375 x 24. Confirm the threads of both the suppressor and adapter are clean and free of debris. We recommend using a small amount of rocksett on the adapter to prevent it from backing off during firing.
-AR9SD Integral:
The AR9SD series suppressors are rail/handguard specific. Ensure you have the appropriate handguard for your model. The AR9SD Series require that the handguard and barrel nut are removed from the upper receiever, if at all unsure about this process or lack the necessary tools please seek the services of a qualified gunsmith. *Requires Vice, Torque Wrench, upper receiver block and barrel nut tool. 1.) Install a 5" or shorter barrel on an ar15/9mm compatible upper receiver. Ensure the barrel extension and receiver are clean and free of debris. 2.) Inspect and ensure the upper receiver threads and suppressor threads are clean and free of debris. A light coat of anti-seize applied to the threads is recommended. 3.) Using the barrel nut tool and torque wrench, torque the suppressor to 45 ft/lbs. 4.) Install the appropriate handguard, torque handguard screws to manufacturer spec.
-BABA YAGA 2: The Baba Yaga 2 indexes off the muzzle, LH. Be sure the Muzzle and threads are clean and free of debris prior to installation.